- Home
-
A small movable and rotatable luminaire mounted along a fixed track, typically used to provide diverse and flexible lighting effects. Track lights can change the position and direction of light as needed, and are commonly used in shops, exhibition halls, studios and other places.
LED track light installation method
1. Remove the track light and connect the power cord to leave the wire.
2. Position and stamp the top of the ceiling. The track lights are connected to the power cord and wrapped with insulating tape.
3. Use a screwdriver to tighten the screws attached to the track light to secure the spotlight.
4. Adjust the direction of the track light, and the bulb installation is complete.
5. At this point, turn on the bulb and see how it glows.
6. Finally, leaking wiring can be connected to an insulated joint or hidden under a ceiling hole.
LED track light installation instructions:
1. Be sure to turn off the power before installation. During installation, do not touch the surface with your hands.
2. During the installation process, avoid installing in places with heat sources or corrosive gases.
3. Detailed installation of LED track lights, including tracks, lamp holders fixed on the lamp holder, lamp holders on the tracks, and LED devices in the lamp holders.
Maintenance method of LED track light:
During cleaning and maintenance, care should be taken not to change the structure of the lamp, and do not replace some parts of the LED track lamp and lantern at will.
Replace the aging lamp in time according to the light source parameters provided by the sign, and when it is found that both ends of the lamp are red, the lamp tube is black or has a black shadow, and the lamp does not jump bright, the lamp of the LED track light should be replaced in time to prevent unsafe phenomena such as ballast burnout.
A small movable and rotatable luminaire mounted along a fixed track, typically used to provide diverse and flexible lighting effects. Track lights can change the position and direction of light as needed, and are commonly used in shops, exhibition halls, studios and other places.
LED track light installation method
1. Remove the track light and connect the power cord to leave the wire.
2. Position and stamp the top of the ceiling. The track lights are connected to the power cord and wrapped with insulating tape.
3. Use a screwdriver to tighten the screws attached to the track light to secure the spotlight.
4. Adjust the direction of the track light, and the bulb installation is complete.
5. At this point, turn on the bulb and see how it glows.
6. Finally, leaking wiring can be connected to an insulated joint or hidden under a ceiling hole.
LED track light installation instructions:
1. Be sure to turn off the power before installation. During installation, do not touch the surface with your hands.
2. During the installation process, avoid installing in places with heat sources or corrosive gases.
3. Detailed installation of LED track lights, including tracks, lamp holders fixed on the lamp holder, lamp holders on the tracks, and LED devices in the lamp holders.
Maintenance method of LED track light:
During cleaning and maintenance, care should be taken not to change the structure of the lamp, and do not replace some parts of the LED track lamp and lantern at will.
Replace the aging lamp in time according to the light source parameters provided by the sign, and when it is found that both ends of the lamp are red, the lamp tube is black or has a black shadow, and the lamp does not jump bright, the lamp of the LED track light should be replaced in time to prevent unsafe phenomena such as ballast burnout.
